Australian printing, framing and fulfilment for artists
Choose a print format 0
Petite Pink Palais repeat wallpaper in a soft pink bedroom

CUSTOM REPEAT WALLPAPER / MADE IN AUSTRALIA

Custom Repeat Wallpaper Roll

Upload one seamless repeat file prepared at 70cm wide at final scale. We print one 70cm × 10m roll on smooth paste-the-wall wallpaper.

Configure and order your roll
$299.95Per roll · AUD including GST · delivery calculated separately
Repeat file
70cm wide at final scale
Finished roll
70cm wide × 10m long
Material
Smooth paste-the-wall wallpaper

YOUR NUMBERS

Work out your margin.

You set your own selling price. Enter it here to see the gross profit before delivery and other business costs.

Print Punch production charge
Choose your product options
Gross profit before delivery
Enter your selling price
Gross margin
Enter your selling price

Delivery, payment fees, discounts, taxes and your other business costs are not included. This is a planning tool, not a recommended retail price.

Use a high-resolution TIFF, JPG, PNG or WebP up to 200 MB. The production file uploads securely, previews here where supported and attaches to your order. It must be at final scale and tile cleanly on every repeating edge.

We review the uploaded repeat before production. If the file is not print-ready, we will contact you before printing.

HOW TO INSTALL PASTE-THE-WALL WALLPAPER

Cut each drop, paste the wall and butt the joins.

Cut the 10m roll into drops for your wall height, allowing for top and bottom trimming and the design’s pattern match. Read the paste manufacturer’s directions before installation.

For the best result, we recommend an experienced wallpaper installer, especially for large repeats or feature walls.

  1. 01

    Prepare the wall

    The wall must be clean, smooth, dry and sound. Remove old wallpaper and loose paint, fill and sand defects, then prime or seal the wall as required for its surface.

  2. 02

    Plan and cut the drops

    Measure the wall height and cut each drop from the 10m roll with extra at the top and bottom. Match the design before cutting the next drop so you allow for pattern repeat and waste.

  3. 03

    Mark the first plumb line

    Use a level or plumb line to mark a perfectly straight vertical guide. Do not rely on a corner, ceiling or door frame to be square.

  4. 04

    Paste the wall

    Use a quality paste suitable for non-woven paste-the-wall wallpaper and the prepared wall surface. Follow the paste maker’s mixing and coverage directions, working one drop width at a time.

  5. 05

    Hang without stretching

    Position the first drop to the plumb line, smooth from the centre out and remove air gently. Hang the next drop edge to edge, matching the pattern. Butt the join without overlapping or pulling the wallpaper.

  6. 06

    Trim and clean as you go

    Trim the top and bottom with a sharp blade and clean straightedge. Wipe fresh paste from the face and joins immediately with a clean damp sponge, then dry with a soft cloth.

REPEAT FILE PREPARATION

Check the repeat before you upload.

Download the 70 cm final-scale template, inspect every edge and place one paid test roll before a colour-critical collector launch.

70 cm repeat template

An original 700 × 700 mm SVG guide with edge-match, centre and safe-area markers.

Download the SVG template

Use the 70 cm final scale

The supplied artwork must be exactly 70 cm wide at the scale you want printed. Do not scale it again after the repeat is built.

Match every repeating edge

Anything leaving the left edge must continue at the same height on the right. Anything leaving the top must continue at the same position on the bottom.

Check resolution and colour profile

Aim for 300 ppi at final scale, use sRGB and embed the profile. The browser preview checks the repeat, not printed colour.

Export a clean production file

Remove the guide layer, crop to the repeat tile and exclude printer marks, crop marks and unrequested bleed.

PASS

Opposite edges continue

The motif leaves and re-enters at matching positions, so the repeated roll has no visible edge break.

FIX BEFORE UPLOAD

A shifted edge creates a seam

The right edge sits lower than the left. This produces a visible jump each time the tile repeats.

FIX BEFORE UPLOAD

Mismatched scale breaks the repeat

The opposite edge changes size. Keep the same motif size and position on both sides.

Start with one paid test roll.

Send the first paid test roll to your own address. Check scale, repeat, colour, material and packing before taking collector orders.

Order a paid test roll

WALLPAPER ROLL QUESTIONS

Before you upload, check the repeat.

The practical side of putting your art into the world.

What file should I upload?

Upload one high-resolution TIFF, JPG, PNG or WebP up to 200 MB. Prepare the seamless repeat at exactly 70cm wide and final scale, with every repeating edge matching. Aim for 300 ppi, use sRGB with the profile embedded, and remove guide layers, printer marks and unrequested bleed. The preview checks the repeat, not printed colour; we review the file before production.

What will I receive?

Each unit is one 70cm-wide × 10m-long roll of smooth paste-the-wall wallpaper printed with your supplied repeat. It is not Peel & Stick wallpaper. Cut the roll into drops for your wall height, allowing for trimming and pattern matching.

How much is each roll?

Each 70cm × 10m roll costs $299.95 AUD including GST. Delivery is calculated separately at checkout for your order and destination.

How many rolls do I need?

Plan the number of 70cm-wide drops needed across your wall, then how many full drops you can cut from each 10m roll. Allow extra length for top and bottom trimming and the design’s pattern match. The quantity depends on your wall dimensions and repeat, so confirm the cutting plan before ordering rather than using roll area alone.

ARTIST JOURNAL

Guides for wallpaper designers

Read all guides